AnyCubic Chiron Solid Bed Mounts – ABS

Product Details

Printed and designed in the USA by TH3D Studio Black ABS. Printed with 50% infill, 3 outer walls, and 0.2mm layer height. Tested up to 100C bed temps to not warp or deform.

Installation Directions

1. Unscrew the thumbscrews on all 4 bed corners.
2. Lift the bed off the Y carriage and remove the springs.
3. Slide the solid bed mounts on the screws with the side that has the larger hole towards the bed.
4. Put the bed back on the Y carriage and align the screws to go back through the Y carriage
5. Reinstall the thumbscrews and tighten down.
   1. If you have BLUE loctite, apply that to the screw ends before putting the thumbscrews back on to prevent them from ever unscrewing due to printer vibrations.

To see how to remove the bed you can see AnyCubic official bed replacement video: ANYCUBIC Chiron — How to Replace the Heatbed – YouTube

Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:

• Email Support: $25 per ticket
• Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes

Get help when you need it! Click here to contact us to get paid support.