-
×
Sovol SV06 Plus Power Supply - Upgrade/Replacement - Meanwell
- Includes:
24V 350W PSU Replacement/Upgrade - Genuine MeanWell × 1
1 × $52.99
Meet the Owner
I’ve been passionate about tinkering, electronics, and computers since I was young. In 2016, I discovered 3D printing, and it quickly became more than just a hobby—it became my mission.
With over a decade of IT experience in support, project management, and systems administration, along with earning my Eagle Scout rank in 2007, I founded TH3D Studio to make 3D printing easier and more accessible. My goal is to help makers spend less time troubleshooting and more time printing.
Happy Printing!
~Tim Hoogland, Owner
Tim Hoogland
Owner & Founder
Things that are Important to Us
Our Dedicated, US Based Team
TH3D is based out of Hobart, IN. All of our team members are in the US, we do not outsource any of our positions to people outside the US.
We run a hybrid of onsite and remote employees to maximize efficiency and coverage of our customers that are all over the world. We have a dedicated team of people who only handle customer service and technical support requests.
Honest Reviews
Unlike other people in the 3D printing space who rely on making sales through affiliate programs, we do not. We will always be honest when reviewing a 3D printer even if there are issues.
Many channels (especially ones that work with Bambu Labs) are bound by agreements where they cannot be honest with you on negative aspects of products.
Focus on Quality and Service
Our focus is to get our customers the best products at fair prices. We’re all makers here, and we know how frustrating getting cheap parts from China is and not getting what you wanted the first time.
Everything we carry are parts and products that we use on our in-house machines to make our lives easier. There is enough to worry about in this hobby/industry so let us help simplify your 3D printing life by ensuring you get quality parts and excellent support.
When we design products, we take the time to run them through stress testing and analysis to make sure they work and last. Unlike many vendors in the 3D printing market, we do not use our customers to test our products, we sell products that work and are free of major design flaws.
Check out our Product Reviews
Kit was great and very easy to follow along. Did this on an Ender pro 3 so had to access from the bottom but no big deal. Some steps took a little lon...More
Kit was great and very easy to follow along. Did this on an Ender pro 3 so had to access from the bottom but no big deal. Some steps took a little longer then the video said to expect so be patient. Just getting into 3D printing and am liking what these folks are doing. Nice to know I now have thermo protection, wife would really be pissed if I burned down the house. Thanks TH3D!
I've never done any type of 3D printer modifications. This worked great. I followed the instructions here along with YouTube videos for the Ender 3. F...More
I've never done any type of 3D printer modifications. This worked great. I followed the instructions here along with YouTube videos for the Ender 3. Fiddled for a while with a Mac, and then eventually got it working from my Linux system. I think if I would have been on Windows it would have been faster but that's ok. I think the TH3D products have worked as advertised. Now onto adding the EZABL system!
Easy install on a Ender-3. I replaced all stock wires and xt60 connectors with beefier higher quality parts. Noted a huge difference in warmup time.
...More
Easy install on a Ender-3. I replaced all stock wires and xt60 connectors with beefier higher quality parts. Noted a huge difference in warmup time.
Tried printing ABS with the stock mosfets and layer separation was a huge problem, as I could only eek 90c on the bed temperature. Now it cranks to 120c no problem, fast and stable and ABS prints are much improved.
Tried printing ABS with the stock mosfets and layer separation was a huge problem, as I could only eek 90c on the bed temperature. Now it cranks to 120c no problem, fast and stable and ABS prints are much improved.
Works great so far, not too hard to install. Bed heats up faster on my CR10. I'm thinking of buying a second for the hotend.
Ender 2 note: make sure to purchase 4 x M3x16 bolts (so 4mm longer than stock) as you cannot use the stock bolts with the TH3D delivered fan. The stoc...More
Ender 2 note: make sure to purchase 4 x M3x16 bolts (so 4mm longer than stock) as you cannot use the stock bolts with the TH3D delivered fan. The stock Ender 2 fan mounting holes are deeper at one side to allow the stock bolts to slide in, the new Sunon fan does not have these.
This is the first upgrade to every printer I bring onto my printer farm. I feel it is an essential upgrade and this product surpasses every capricorn ...More
This is the first upgrade to every printer I bring onto my printer farm. I feel it is an essential upgrade and this product surpasses every capricorn clone that I've come across. Consistent internal diameter, great temperature resilience and amazing product support (not that it's needed, this tube wont give you issues)
I've never touched an Arduino board before, but thanks to the all in one kit and the amazing documentation and video walkthroughs I was able to flash ...More
I've never touched an Arduino board before, but thanks to the all in one kit and the amazing documentation and video walkthroughs I was able to flash a bootloader and upgrade my Ender 5's firmware in about 30 minutes.
Replacing the stock fans with this fan coupled with the other two really reduced the fan noise from my CR-10 control box which was really annoying. I...More
Replacing the stock fans with this fan coupled with the other two really reduced the fan noise from my CR-10 control box which was really annoying. I recommend buying the kit of three and saving some $.
Replacing the stock fans with this fan coupled with the other two really quieted down the fan noise from my CR-10 control box which was really annoyin...More
Replacing the stock fans with this fan coupled with the other two really quieted down the fan noise from my CR-10 control box which was really annoying. I recommend buying the kit of three and saving some $.
Replacing the stock fans with this fan coupled with the other two really quieted down the fan noise from my CR-10 control box which was really annoyin...More
Replacing the stock fans with this fan coupled with the other two really quieted down the fan noise from my CR-10 control box which was really annoying. I recommend buying the kit of three and saving some $.
I run a V6 hotend and wanted to print ABS. In order to do so I needed to bump my temps up above 240C and felt that the stock PTFE tubing wouldn't meet...More
I run a V6 hotend and wanted to print ABS. In order to do so I needed to bump my temps up above 240C and felt that the stock PTFE tubing wouldn't meet my needs. Since I have small animals that could be affected by off-gassing I upgraded to the tough tube. Now I have peace of mind with running to 250C no problems.