Bambu X1 Series Lighting Upgrade Kit – V2
$9.99
-
Safe for your printer, unlike kits sold on Amazon, Ebay, and Aliexpress. Upgrade your lighting to see better inside your printer. Plugs into the stock LED port, replacing your stock light. V2 kits include self-sticking cable clips for wire management.
Each LED segment is connected with premium silicone wire and allows for placement on the left, rear, and right inside the printer. Click here for the Installation Guide
8 in stock
| Quantity | Discount | Price |
|---|---|---|
| 4-10 | 10% | $8.99 |
| 11-Unlimited | 15% | $8.49 |
Description
🔧 Need Help?
Be sure to read the documentation before using this product! Find setup guides, troubleshooting tips, and more in our Help Center.
📖 Check it out here: View Documentation
Printable Mounts & Wire Management:
Printed Mounts demo (not included print from the above link):
Review from The Edge of Tech
Actual Pictures of the Lighting kit installed on our X1C
Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:
- Email Support: $25 per ticket
- Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes
Get help when you need it! Click here to contact us to get paid support.
Reviews (18)
18 reviews for Bambu X1 Series Lighting Upgrade Kit – V2
Add a review
Additional information
| Weight | 4 oz |
|---|---|
| Dimensions | 3 × 2 × 0.2 in |
| Made In | 🇨🇳 China |
| Warranty Length | 6 Months |
Gillithonnen (verified owner) –
Significant improvement for lighting! Literally night and day difference. I’m looking forward to seeing the Y-connector to reconnect the stock lighting, because with the LEDs above the head unit, it does cast shadows and it seems like there is a dark spot near the camera.
I’ve also went and made a channel for the corner above the exhaust port in lieu of the wire clips provided in the kit. https://makerworld.com/en/models/387626#profileId-288234
valp666 (verified owner) –
Super design. Very easy to install. Tim’s created great function and value. A must have for the X and P printers. Also note that so far I have had no issues with Lidar and auto-configurations due to the increased light. But it is possible so test at your own convenience.
I also bought a bag of JST 1.25 mm male and female pigtails on amazon and made a y-connector so I run this mod along with the factory LED.
designerpatrick (verified owner) –
Super easy to install and can actually see the build plate now
kurtholley24 (verified owner) –
What a difference. I did the LED’s and front door and it is a night and day change
Don DeHamer (verified owner) –
Super easy to install and works great. Night and day with the difference. Added some 3d printed brackets to put the lights in the front and sides to avoid the moving parts and I couldn’t be happier.
David Hemendinger (verified owner) –
Great product and delivered timely. Chose to mount mine in the front, seems to light everything up more efficiently!
Mitchell Reinitz (verified owner) –
I installed this kit on a simple riser that allows the glass lid to slide open, and which provides an angled surface for mounting lights. The install was easy, and the results are excellent.
rjc (verified owner) –
(Thanks to other reviewers for linking to the light strip clips! https://www.printables.com/model/836760-th3d-led-bambu-labs-x1-carbon-light-strip-clip)
I printed three of the clips and installed them on the left, front and finally right sides. I then unplugged the original light bar and plugged in these new LEDs. WOW! Major lighting improvement! I like them a LOT.