TH3D Bed Cement – 3D Printer Bed Adhesive – Holds Strong, Releases Easy – 100ML Bottle

Tired of prints popping off the bed or PETG/TPU ruining your build plates? Our new Bed Cement is one of the best 3D printing bed adhesives that keeps your prints stuck during a print and releases them when your bed cools. This is our own recipe that we’ve been working on and now we’re sharing it with you! Almost HALF the price of the leading 3D printing bed adhesives and MUCH easier to use thanks to our EZApply applicator tip thats installed in every bottle. What are you waiting for? Grab a bottle today and get to printing with less stress!

FAQ

What bed types does this work on? This works on all beds including PEI, Flex Plates, Glass, Garolite, and many more.

Glass Bed application tips: When using with glass apply it at 50C or higher and go slowly to let it flow on the glass, otherwise it will form droplets instead of spreading out.

What filaments does this work with? We’ve tested this and it works on PLA, PETG, TPU/TPE, ABS, ASA, Nylons, PC, CF and GF Fills, and Wood Fill.

Do I need heat to use the glue? Yes, our Bed Cement is formulated to be used with bed heat on. 60C for PLA, 80C for PETG, 100C for ABS/ASA – Basically whatever heat your filament maker recommends for their plastic.

How often do I need to re-apply? In most cases you should re-apply the glue every 5-10 prints. Basically, re-apply the glue when adhesion is low. If you are printing in the same spot over and over again you can just touch up just that spot on the bed where you were printing instead of having to do the entire bed. With our EZApply applicator tip, this is super ‘EZ’.

Prints still not sticking? While the adhesive is great it will not compensate for user error of their machine.

• Make sure you have a good 1st layer with it squished on the bed
• If using a printer equipped with auto bed leveling make sure it is calibrated
• Make sure you are heating up the bed
• Slow down your 1st layer speed to improve adhesion

Recommended Bed Temperatures

• ABS/ASA – 100-110C
• PETG/PCTG – 80C
• PLA – 60C
• TPU/TPE – 50C
• Nylons – Refer to manufacturer and select the higher end if there is a range.

Important Information

• This adhesive is Isopropyl Alcohol based so keep it away from open flames and other ignition sources
  • We use a water + IPA base to help the adhesive dry quicker than cheaper water-based adhesives. It also helps with dissolution and transfer of the glues in the solution.
• Replace the cap when you are done applying the product to your bed to keep it from drying out
• Bottles have a seal in them – Unscrew the top and remove the seal before use.
• Store bottle upright after using – Bottles can possibly leak if left on their side or upside down for extended periods of time.
• KEEP AWAY FROM CHILDREN – DO NOT DRINK

Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:

• Email Support: $25 per ticket
• Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes

Get help when you need it! Click here to contact us to get paid support.