EZPlug V2 – Open Source Smart Plug with ESP32-C3, Matter Support, and Power Monitoring 
Meet the Owner
I’ve been passionate about tinkering, electronics, and computers since I was young. In 2016, I discovered 3D printing, and it quickly became more than just a hobby—it became my mission.
With over a decade of IT experience in support, project management, and systems administration, along with earning my Eagle Scout rank in 2007, I founded TH3D Studio to make 3D printing easier and more accessible. My goal is to help makers spend less time troubleshooting and more time printing.
Happy Printing!
~Tim Hoogland, Owner
Tim Hoogland
Owner & Founder
Things that are Important to Us
Our Dedicated, US Based Team
TH3D is based out of Hobart, IN. All of our team members are in the US, we do not outsource any of our positions to people outside the US.
We run a hybrid of onsite and remote employees to maximize efficiency and coverage of our customers that are all over the world. We have a dedicated team of people who only handle customer service and technical support requests.
Honest Reviews
Unlike other people in the 3D printing space who rely on making sales through affiliate programs, we do not. We will always be honest when reviewing a 3D printer even if there are issues.
Many channels (especially ones that work with Bambu Labs) are bound by agreements where they cannot be honest with you on negative aspects of products.
Focus on Quality and Service
Our focus is to get our customers the best products at fair prices. We’re all makers here, and we know how frustrating getting cheap parts from China is and not getting what you wanted the first time.
Everything we carry are parts and products that we use on our in-house machines to make our lives easier. There is enough to worry about in this hobby/industry so let us help simplify your 3D printing life by ensuring you get quality parts and excellent support.
When we design products, we take the time to run them through stress testing and analysis to make sure they work and last. Unlike many vendors in the 3D printing market, we do not use our customers to test our products, we sell products that work and are free of major design flaws.
Check out our Product Reviews
SV06 Plus Parts Cooling Fan Kit
Much better cooling than OEM, already noticed a difference.
Kit fit perfect with no issues, very well designed. Would definitely recommend.
Custome...More
Much better cooling than OEM, already noticed a difference.
Kit fit perfect with no issues, very well designed. Would definitely recommend.
Customer service was awesome, thanks for the quick responses on my questions Tim.
Kit fit perfect with no issues, very well designed. Would definitely recommend.
Customer service was awesome, thanks for the quick responses on my questions Tim.
SV06 Plus PSU Fan
Great upgrade, much quieter than OEM fan.
Excellent customer service.
Excellent customer service.
My first open source plug
and it was easier to setup than the app-bound brands. I love that I can control it with a webpage and that its relay still works with alexa.
USB Power Isolator
Liked them so much, I bought more
I now have these installed on all three of my 3D printers and can only say good things about them. I use OctoPrint to control the printers and the ab...More
I now have these installed on all three of my 3D printers and can only say good things about them. I use OctoPrint to control the printers and the ability of the Tasmota plug-in to power off the printer in the even of a thermal runaway or other printer fault gives me more peace of mind. No need to sit next to it and babysit the printer.
I added a USB power isolator to eliminate any back feed from the Pi into the printer controller and this combined with the EZPlug allows complete remote control. On prints at home when I am at work, my wife just needs to power up the Pi and I can run it remotely. She then checks on it from time to time and occasionally gets to make fun of my rare failed print.
I added a USB power isolator to eliminate any back feed from the Pi into the printer controller and this combined with the EZPlug allows complete remote control. On prints at home when I am at work, my wife just needs to power up the Pi and I can run it remotely. She then checks on it from time to time and occasionally gets to make fun of my rare failed print.
love the ezabl
i put either the 18 or the 8 sensor on all my printers im ffixing to use the 8 on my cr10s5 corexy conversion and on my zero g merc1 buikd
Saved the day
I was ready to pound my SV06 plus with a sludge hammer, I couldn't figure out what was happening. Long story short, I read threads about the OEM power...More
I was ready to pound my SV06 plus with a sludge hammer, I couldn't figure out what was happening. Long story short, I read threads about the OEM power supply that came on the printer being inferior. I purchased the Meanwell upgrade kit for the SV06 Plus and it works like a champ again. TH3D save the day.
Great product - I use it all the time. Highly recommend it
My Creality K2 Plus and 2x CFS units absolutely love the upgrade!
I replaced every tube on the K2 printer and my CFS units. I would highly recommend them.
Good stuff!!
I have this on all 3 of my printers. Most recently I upgraded the tubing on my K2 Plus. Excellent PTFE Tubing, much better than stock. The one thin...More
I have this on all 3 of my printers. Most recently I upgraded the tubing on my K2 Plus. Excellent PTFE Tubing, much better than stock. The one thing that I would love to see is a translucent/clear version to go between the inside of the printer cabinet to the extruder. While this is far superior to stock, I do miss being able to see the filament moving through the Bowden tube.
Fantastic build quality
I added these to my order for Tough Tube because I like to have good ergonomic tools for my gear. I didn't really expect much for less than $14. I w...More
I added these to my order for Tough Tube because I like to have good ergonomic tools for my gear. I didn't really expect much for less than $14. I was very pleasantly surprised .
This thing rocks
I bricked my first one but that was on me, the device itself is true to its name. Its very simple to setup and it just works.
Printed perfect and works great.
