Ratcheting Crimping Tool for DuPont, JST, TE, & Molex Terminals – SN-2549

This is a high-quality crimp tool for most connectors we use on our 3D printers. This ratcheting type lets you get a consistent crimp and does a DOUBLE crimp in one squeeze. The handle is comfortable for repeat use. There is also a tension adjustment on the side with the silver Philips head screw.

How to Adjust Tension

If you look at the tensioner you will see arrows with + and – on it. Turning the adjustment in the + direction is more tension and turning the adjustment in the – direction is less tension. There is a screw that holds the tensioner in place. Unscrew the philips screw and then turn the tension adjustment wheel in the – direction then put the screw back in. This will make it crimp less on the pins. If it is set too high it will mangle the pin and/or wire. Higher tension is for larger pins/wires and lower tension is for smaller pins/wires.

Works with the following type of connectors/pins

• 2.54mm
• 3.96mm
• 4.8mm
• 5.08mm
• 6.3mm
• JST Pins
• Molex Pins

Lower Prices, Flexible Support Options!
To offer you the best possible pricing, this product does not include technical support. However, if you ever need assistance, we offer affordable support options that you can purchase separately:

• Email Support: $25 per ticket
• Remote Video Call with PC Access: $30 for 30 minutes | $50 for 60 minutes

Get help when you need it! Click here to contact us to get paid support.